3 Legged Thing 3 Legged Thing Billy Carbon Tripod | Tripods

3 Legged Thing Billy Carbon Tripod

With A Blue And Orange Color Scheme, This Punks Series Billy Carbon Fiber Tripod With Airhed Neo Ball Head From 3 Legged Thing Is A Support System That Features A Tripod With A Detachable Leg And Removable Center Column, Which Can Be Combined To Form A Monopod With A 32.5 To 67.5″ Adjustable Height. Cameras, Lenses, Or Sport Optics That Are Compatible With A 1/4″-20 Mount Can Be Connected To The Included Qr4 Quick Release Plate, Which Is Secured To The Airhed Neo Ball Head Using A Quick Release Clamp. The Ball Head Is Removable, Provides Up To A 90° Tilt For Portrait Orientation, 360° Of Independent Rotation, And Can Be Locked Into Place Along Its Range Of Movement.

• Support System With Removable Ball Head That Features A Tripod With A Detachable Leg And Removable Center Column, Which Can Be Combined To Form A Monopod With A 32.5 To 67.5″ Adjustable Height
• As A Tripod, Supports Up To 40 Lb
• Push-And-Pull, Rapid Center Column With Ballast Loop For Rapid Camera, Lens, Or Sport Optic Positioning
• Can Be Set For A Minimum Height Of 17.7″, Or 7.8″ Without The Center Column
• All Three Legs Can Be Extended In The Tripod Configuration To Obtain A Maximum Height Of 55″, Or 65″ When Used With The Center Column Fully Raised
• Center Column Is Reversible, Facilitating Low-Angle Photography Where An Attached Camera Is Positioned Among The Tripod’S Legs Instead Of Above Them
• Legs Each Feature 4 Sections, Twist Locks For Fast Deployment, And Can Be Independently Spread
• Legs Can Be Locked At 23°, 55°, Or 80° Angles
• Rubber Feet Help To Enhance Stability On A Wide Variety Of Surfaces
• Weighs 3 Lb And Measures 17.7″ When All Three Legs Are Reversed 180° And Folded
• Ball Head Provides Up To A 90° Tilt For Portrait Orientation, 360° Of Independent Rotation, And Can Be Locked Into Place Along Its Range Of Movement
• Arca-Type Clamp On Ball Head To Secure Quick Release Plate
• Included Toolz Multi-Tool With 4Mm Hex Key, Flat Head Screwdriver Tip, As Well As Integrated Carabiner And Bottle Opener, Plus Key Chain
• Hex Key Adjusts Tension On Leg Hinges
• Fasten Or Remove Quick Release Plate From A Device’S Accessory Thread With Hex Key Or Flat Head Screwdriver Tip
• Carbon Fiber Legs With Built-In Bubble Level
• Removable, Aluminum-Alloy Ball Head With Quick Release Clamp And Dual, Built-In Bubble Levels
• Quick Release Plate With 1/4″-20 Mount And Rubberized, Anti-Slip Surface
• Center Column Platform For Ball Head With Three Accessory Eyelets As Well As Reversible, 3/8″-16 And 1/4″-20 Mount
• Included Nylon Drawstring Carry Bag For Storage And Transport Of The Tripod
• Microfiber Bag For Storage And Transport Of The Ball Head